Numark M1 Two Channel Compact Mixer

The Numark M1 mixer, is a very good quality budget mixer, which is perfect for mixing and scratching DJ's, it has a real nice feel to it. You can plug in turntables, CD players, and any other line-level music source, as well as a microphone.



You can set the level of each channel of M1 with trim and line faders, and then tailor the high and low frequencies with the rotary EQs on each channel. Preview using the cue mini-crossfader and headphone output, and then mix with the replaceable crossfader.



M1 has all the features you need to get maximum performance out of minimum space.

Two-channel compact-tabletop mixer

Inputs: two phono (RCA), two line (RCA), mic (1/4")

Outputs: Master (RCA), Headphone (1/4" stereo)

Rotary EQ and gain on each channel

Replaceable crossfader

Mini-crossfader cueing

Inputs:

Line: 18K ohm input impedance; 200mV rms sensitivity for 4V output

Mic: 3K ohm input impedance unbalanced; 2mV rms sensitivity for 4V output; 20mV rms max input

Phono: 47K ohm input impedance; 3mV rms sensitivity @ 1KHz for 4V output

Outputs:

Master: 8V rms max

Headphone: 125mW into 32 ohm

Distortion: less than 0.1%

S/N Ratio (maximum output JIS-A weighted):

Line: Better than -90dB

Mic: Better than -59dB

Phono: Better than -65dB

Frequency response:

Line: 20Hz-20KHz +/-3dB

Mic: 20Hz-20KHz +/-3, -1/-7dB

Phono: ±3dB with -10dB attenuation at 10Hz to reduce rumble and feedback

Channel equalizer:

Bass: +12/-18 ±3dB @100Hz

Treble: +13/-21.5 ±3dB@10KHz

General:

Dimensions (W x D x H): 197mm x 267.5mm x 100mm

Power consumption: 5 Watt typical; 8 Watt with full headphone output

Weight: 2.4kgs (incl. Transformer)