Equinox Mega Bar System

The system has full DMX control and can be set to any one of 15 DMX channels although it is likely that most users will rely on the footswitch and the automatic modes. If more lighting bars are required, they can be connected in master/slave fashion using standard XLR cables. The footswitch unit is gratifyingly robust, with a folded steel case and very substantial switches. There are four switches in all, which are labelled: Preset, Sound, Hold and Blackout. Preset mode steps through nine options, which comprise of seven static colour choices, an automatic colour change, or a morph between colours. When Sound is activated, the unit is triggered from a microphone built into the T-bar, which has its own sensitivity control. In this mode the system steps through a series of built-in chases with some involving individual arrays being switched on and off, and others involving all the arrays in a colour change sequence. Hold freezes the current lighting state, whereas Blackout kills all the lamps.

Features

• Features:
• DMX channels: 2, 3, 4, 7, 8, 14, and 15 selectable
• LEDs: 28 Mega Bright 3W Tri-colour LEDs
• Individual tilt & swivel on each panel
• Beam angle: 40 degrees
• 3-Pin XLR In/Out sockets for DMX
• 1/4" jack foot switch socket
• Slimline design
• DMX 512 compatible
• Linkable - connect multiple kits to one controller
• Height adjustable stand
• All metal design
• Ultra low heat output
• No duty cycle
• Specifications:
• Power supply: 240V
• Power consumption: 115W
• Dimensions: 1280 x 380 x 110mm
• Weight: 16Kgs