Alto Profesional Audio Alto Tmx120Dfx Powered Mixing Deck

Alto TMX 120DFX is a powered mixing deck which is jam packed with inputs and effects! But also with a huge amp built in! This is perfect for people who are looking for a mixer with alot of mic inputs and alot of other inputs! The Alto TMX120 DFX gets an honest 10/10.

Microphone Input: Electronically Balanced

Frequency Response: 20 Hz to 20 kHz, +/-1 dB

Distortion (THD&N): _0.03% at 0 dBu, 1 kHz

Gain range 0 dB to 45 dB (Mic)

SNR (Signal-to-Noise Ratio): 115 dB

Line Input: Electronically Balanced (Unbalanced)

Frequency Response: 20 Hz to 20 kHz, +/- 1 dB

Distortion (THD&N): _0.03% at 0 dBu, 1 kHz

Gain range: -15 dBu to 30 dBu

Impedance Microphone Input: 1.4 kOhms

Channel Insert return: 2.5 kOhms

All Other Input: 10 kOhms or Greater

Tape Out: 1 kOhms

All Other Outputs 120 Ohms

Equalization

Hi Shelving: ±15 dB @ 12 kHz

Mid bell: ±12 dB @ 100 Hz - 8 kHz

Low shelving: ±15 dB @ 80 Hz

MAIN EQ 9 EQ: (63 Hz, 125 Hz, 250 Hz, 500 Hz, 1 kHz, 2 kHz, 4 kHz, 8 kHz, 16 kHz) ±15 dB

DSP Section: A/D and D/A Converters 24-bit

DSP Resolution: 24-bit

Type of effects

Large Hall, Medium Hall, Large Room, Medium Room, Karaoke, Short

Spring Reverb, Long Spring Reverb, Chamber, Mono Delay, Mono

Echo, Stereo Echo, Flanger, Chorus, Reverb + Chorus, Reverb +

Delay, Thickener

Presets 16

Controls 16-Posistion Preset Selector

Clip LED

Mute switch with peak LED indicator

Main Mix Section Noise (Bus noise)

Fader 0 dB, Channels muted: -90 dBr (ref.: +4 dBu)

Fader 0 dB, All input channels assigned and set to Unity Gain: -88 dBr (ref.: +4 dBu)

Power Consumption Stereo mode

2 x 500 W @ 4 Ohm (EIAJ) 2 x 340 W @ 8 Ohm (RMS)

Bridge mode

1000 W @ 8 Ohm (EIAJ)

Phantom Power (Mic Pin 2 / Pin 3 and Pin 1): 47 ±2 V

Power supply Main voltage 115 V / 230 V

Dimensions (WxLxH): 565mm x 450mm x 145mm

Weight: 23.5 lb