Alto! do we need to say any more ! The zephyr zmx 862 from alto offers amazing value and functionality , this little mixer will not disappiont . With 2 mic channels and 2 stereo input channels and aux inputs and not forgetting headphone connection add to that phantom power , this little zmx 862 is crackin .
Input Channels: Mono channels (Ch. 1 - 2)
Microphone Input: Electronically balanced, discrete input configuration
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion (THD&N): ?0.005% at +4 dBu, 1 kHz
Gain range: 0 dB to 50 dB (Mic)
Maximum Voltage Gain: 70 dB Ch. Mic Input?Main MIx out & Tape out, 80 dB Ch. Mic input?Control room & Phones, 60 dB Ch. Mic input?Aux send
SNR (Signal to Noise Ratio): ?110 dBu
Phantom power (Mic Pin 2 / Pin 3 and Pin 1): +48 V - with switch control
Line Input: Electronically Balanced
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion (THD&N): ?0.005% at + 4 dBu, 1 kHz
Gain Range: 15 dBu to 35 dBu
Stereo Channels: (Ch. 3 - 6)
Line Input: Electronically Balanced
SNR (Signal to Noise Ratio): ?110 dBu
Frequency Response: 20 Hz to 22 kHz, +/-1 dB
Distortion (THD&N): ?0.005% at + 4 dBu, 1 kHz
Gain range: -20 dBu to +20 dBu, 60 dB Ch. Line ? Main Mix out
Maximum Voltage Gain: 20 dB FX return ? Main Mix out, 20 dB RCA Tape input ? Main Mix out
Impedance
Microphone Input: 3.9 kOhms
All Other Inputs: 10 kOhms or greater
Tape Out: 1 kOhms
All Other Outputs: 120 Ohms
Equalization
Mono Channels: High ±15 dB @ 12 kHz, Mid ±15 dB @ 2.5 kHz, Low ±15 dB @ 80 Hz
Stereo Channels: High ±15 dB @ 12 kHz, Mid ±15 dB @ 2.5 kHz, Low ±15 dB @ 80 Hz
Main Mix Section
Tape, Aux, Phones Output
Output level: 0 dBu Unbalanced, 1/4" jacks, Max out +22 dBu Unbalanced, 1/4" jacks noise (Bus Noise): ?-90 dB @ 20 Hz - 22 kHz (channel & Main level at 0 dB, other at minimum, DSP mute)
Power supply: 18 V, 1500 mA
Rated Power Consumption: 18 W
Dimensions (WxLxH): 202mm x 250mm x 58mm
Weight: 3.75 lb
•Eight total inputs including XLR jacks with phantom power on channels one and two
•Two mic input channels with gold plated XLR and balanced line inputs
•Two stereo input channels with balanced TRS jacks
•Extremely high headroom offering extra dynamic range
•Three-shelf EQ on each mono and stereo channel
•Two aux sends per-channel for external effects and monitoring
•Two bus design with Main and Control Room 1/4” stereo outputs
