This site uses cookies to provide and improve your shopping experience.
If you want to benefit from this improved service, please opt-in.
Cookies Page.
With the RP-7000 MK2, Reloop has built a turntable that caters to the high demands of professional DJs and modern nightclubs. With its powerful direct drive motor and rugged construction we were able to develop a sturdy and indestructible turntable that can take on harsh everyday life with ease.
STURDY CASING CONSTRUCTION
By using a combination of metal, rubber and synthetic materials, the RP-7000 MK2's housing is more reinforced and heavy than ever before. This results in a turntable that is extremely resistant to vibrations that can be caused by heavy bass sounds in DJ booths and its shock-absorbing feet help to further improve isolation. The surface is coated with a scratch-resistant high-quality deep black or classic silver metalic finish.
PRECISE MOTOR CONTROL AND REVERSE FUNCTION
As well as the above technical innovations, the RP-7000 MK2 is equipped with a few functions that will make any DJ's life much easier. The newly developed aluminium LED target light is freely moveable to help you find the stylus position in dark surroundings. The target light is also removable and easily exchanged. An additional start/stop button has also been integrated to facilitate a vertical setup (battle position) and by using the buttons on the RP-7000 MK2's top panel, you can switch between the three motor speeds (33 1/3, 45 & 78 rpm). Dedicated buttons for forward and reverse mode allow for further creativity in your mix.
HIGH-RESOLUTION PITCH SECTION WITH DIGITAL FADER
Using the high-resolution pitch fader you can adjust the platter speed in the classic turntable pitch range +/-8%. However, the RP-7000 MK2 is also cable of a wider, DJ-friendly +/- 16% pitch range and a massive +/-50% ultra-pitch. This allows for increased creativity when modulating the playing record's tone. If quartz lock is active, the platter speed will remain unaffected by the fader position and will spin at zero pitch (0%).
HIGH-QUALITY CONNECTIONS AND INTEGRATED PHONO PRE-AMP
Thanks to the recessed rear connection panel, the RP-7000 MK2 can easily be mounted in a flight case and seamlessly positioned next to other DJ gear. The switchable integrated phono pre-amp makes it is possible to use the gold-plated RCA connectors for both phono and line output signals. An optional ground terminal offers additional protection in club environments. All cable connections (RCA/mains) are detachable and easy to exchange, which also helps with transport and storage.
POWERFUL MOTOR WITH EXTENSIVE ADJUSTMENT POSSIBILITIES
The fine-tuned, quartz-driven motor with digital pitch correction operates at a starting torque of 2.8kg/cm, which can be adjusted up to a maximum of 4.5kg/cm. This makes it an extremely smooth running turntable with wow and flutter of just 0.01% WRMS*. Furthermore, the turntable break speed (platter stop) can be adjusted from 0.2 – 6 seconds and the precision-machined, heavy die-cast aluminium platter is lined with vibration reducing rubber to eliminate unwanted vibrations and resonance.
BALANCED S-SHAPED TONE ARM WITH UPGRADED TONE ARM BASE
The RP-7000 MK2 features a statically balanced S-shaped tone arm with hydraulic lift and anti-skating mechanism. The newly developed tone arm base provides improved stability and adjustable height/vertical tracking angle (VTA). The low-resonance tone arm comes with a universal connection for pick-up cartridge systems (SME).
Code:
FEATURES
NEW features of the MK2 version
Built for the club: Rigid chassis construction with an even heavier design with additional reinforcements made of metal, rubber and moulding compound for high vibration damping and isolation
More powerful starting torque (adjustable from 2.8 - 4.5 kg/cm)
Fine-tuned motor control for further optimization of wow and flutter and rotation
Newly developed, height-adjustable tone arm base (VTA) and Anti-Skating control
Particularly light weight and rigid, satin aluminium material used for tone arm
Adjustable Pitch scale for precise adjustments
Optional ground terminal offers additional protection in complex club & studio environments
Easily replaceable, freely rotatable LED needle light in new aluminium design
High-quality and hard-wearing deep black, metallic finish
Quartz driven DJ turntable with upper-torque direct drive
Adjustable stop speed (0.2 - 6 sec.)
Precise control of motor with 3 speeds (33 1/3, 45 & 78 RPM)
Precision manufactured, die cast aluminium turntable
Rubber inlays for reduction of vibrations and background noise
Statically balanced universal S-shaped tone arm with hydraulic lift and anti-skating mechanism
Universal connection for pickup systems (SME)
Pitch range +/-8 %, +/-16 %, +/-50 % (Ultra Pitch)
Quartz lock
Additional start/stop button for vertical positioning
Reverse function: switch for forwards and reverse operation
Recessed connection cavity for easy installation in cases & seamless adjustment
Useable weight of pickups: 3.5~8.5 g (incl. headshell 13~18 g)
Anti-skating range: 0 – 3 g
Effective tone arm mass: 30 g
Connections: 1x PHONO/LINE Out (gold-plated), 1x GND earth connection
General:
Power supply: AC 115/230 V, 60/50 Hz (EU/US), AC 100 V, 50/60 Hz (JP)
Power consumption: 13 W
Dimensions: 458 x 354 x 144,6 mm
Weight: approx. 11.7 kg
Accessories included:
turntable, slipmat, LED needle light, counterweight, PHONO Cinch cable with earth, AC mains adapter, operating instructions
*STYLUS AND CARTS NOT INCLUDED
LETS KEEP IT SIMPLE
DELIVERY:
We use a next day courier service and goods are delivered on next working day basis . For a next day service you must order before 3pm the previous day .
Normal delivery info :
Products are normally available from stock unless stated on the product page(next to stock messaging) and are dispatched within 24 hours of receipt of your order.
Delivery to UK mainland addresses normally takes 1-3(usually 1) working days from receipt of your order by us. Delivery is made through independent carriers, for example Parcelforce. A signature is required on delivery of the product. The cut off time or next delivery is 3pm.
FREE DELIVERY IS FOR UK MAINLAND ONLY, PLEASE CONTACT US FOR QUOTING FOR OFF MAINLAND DELIVERY CHARGES.
Our delivery charges are shown below.(UK MAINLAND) We dont export outside the UK (sorry)
FromToPrice
£0.01£25.00£5.95
£25.01£49.99£7.95
£50.00and over£0.00
RETURNS & CANCELATIONS :
Arrived Damaged or Faulty- If your goods arrived damaged or are faulty your first action is to inform us by email to returns@djanddiscostuff.com or telephone 01325 480507 within 7 days and preferably within 48 hours. Our Returns Department will then arrange the return of these goods and we will replace the goods at no charge or refund any money paid for the goods and postage.
If goods go faulty after a 30 day period but with in the product warranty please contact our return department and arrangements will be made for repair or sometimes replacement goods. it is the responsibility of the customer to return goods to ourselves for repair or replacement after 30 days of delivery.
Non-Faulty Goods - Non-faulty goods must be returned within 14 days after receiving the product. In the first instance please contact us by email to returns@djanddiscostuff.com or telephone 01325480507 preferably within 48 hours. Items must be returned in a unused state with all packing and parts inc manuals
Our Returns Department will then contact you with the relevant procedure. Provided the goods are received in brand new, never been used condition and with the same packaging that they left our warehouse in, we will fully refund the price of the goods including postage where paid. You will receive your refund within 30 days although usually much sooner.
Unless the reason for return is due to a mistake by ourselves, you will be responsible for the cost of the return postage and ensuring that we receive the goods in the above condition. We recommend using a signed for, insured delivery method for your own peace of mind. Non faulty Goods returned after 3 days will have a restocking fee of 10% of the total purchase price.
Refunds Faulty Goods - All verified faulty goods will be fully refunded and we will also pay for the return postage. Please note that the verification process may mean we have to send the item back to the manufacturer. You will receive your refund within 30 days although usually much sooner.
Non-Faulty Goods - Non-faulty goods must be returned within 3 days as detailed above. Provided everything is in order we will fully refund the price of the goods including postage where paid. The return postage will not be refunded unless the reason for return is due to a mistake by ourselves.
Cancellations Provided the goods are received in brand new, never been used condition and with the same packaging that they left our warehouse in, and in 14 days of delivery. we will fully refund the price of the goods including postage where paid. You receive your refund within 30 days although usually much sooner. Unless the reason for return is due to a mistake by ourselves, you will be responsible for the cost of the return postage and ensuring that we receive the goods in the above condition. We recommend using a signed for, insured delivery method for your own peace of mind.
