The 1,100-Watt full range MILAN M15 is a portable 15" two-way powered loudspeaker featuring: two independent input channels with Mic and Line Inputs, selectable via a Mic/Line switch; a two-band master EQ (Bass, Treble); intelligent Limiting; and a Mix Out function for connecting additional powered loudspeakers for easy system expansion.
Designed for both portable and permanent install applications, the M15’s discrete inputs are each equipped with balanced, combination ¼ " jack/ XLR connectors and a Level control, making them ideally suited for a wide range of music sources, from low-impedance microphones, acoustic guitars and keyboards – to mp3 players and mixing consoles.
Thanks to our revolutionary Class-D amplifier technology, we are able to provide enormous power and incredible sonic performance in an easy-to-use, ultra-portable and lightweight package. Class-D amplification makes all the difference, offering the ultimate in energy efficiency and eliminating the need for heavy power supplies and massive heat sinks. This amazing technology makes it possible to design and build extremely powerful products that are significantly lighter in weight than their traditional counterparts, while using less energy and protecting the environment. The lightweight Switch Mode Power Supply, coupled with the industry-leading KLARK TEKNIK Digital Signal Processing (DSP) module, provides dynamic equalisation and sophisticated limiting functions, ensuring optimal performance and long-term reliability.
With its 1,100 Watts of pristine digital output delivered through separately-powered drivers, courtesy of true bi-amping (two amplifiers per speaker system), the M15 delivers high-resolution sound that brings out the best in your music. While some of our competitors apply simple passive crossovers, which inaccurately separate the frequency spectrum and degrade driver performance, TURBOSOUND has gone the extra distance – driving each woofer and tweeter with a separate amplifier for impeccable signal integrity.
The M15’s trapezoidal enclosure is fabricated from high-density polypropylene, and ribbed extensively externally and internally to eliminate resonances – and to provide an attractive, durable cabinet finish. The symmetrical 43° side angles allow the loudspeaker to be conveniently used as a floor monitor. A recessed carry handle on the top is provided for easy lifting and transport, while the dual-angle, pole-mount socket allows the loudspeaker to be mounted on straight poles or speaker stands, either vertically or raised higher and angled down to optimise audience coverage. A total of six M10 rigging points are provided on the top and bottom of the cabinet for secure vertical or horizontal suspension in permanent installations using M10 shoulder eyebolts. Mains power is connected via a non-locking IEC with integrated fuse holder. The illuminated front badge operates in one of three modes: permanently on; permanently off ; or to indicate limiting.
Components 1 x 15" LF driver
1 x 1" HF driver
Connectors Mic/Line input: combo jack/female XLR wired pin 2 hot; Mix out: male XLR wired pin 2 hot; IEC mains connector with integrated fuseholder
Controls Level, Line/Mic, Low Cut, Speech/Music, Bass and Treble, Front LED, Mains on/off
Frequency Range 45 Hz–18 kHz ±3 dB
40 Hz–20 kHz –10 dB
Dispersion @-6 dB pts 90° H x 60° V
Max SPL (peak) 130 dB
Equalisation Bass: ±6 dB @ 80 Hz;
Treble: ±6 dB @ 12 kHz
Boost Frequency N/A
N/A Power LED Blue
Signal LED Green
Limit LED Red
Clip LED Red
Amplifier Protection Full short circuit, open circuit, thermal
Max Output Power LF: 1000 W
HF: 100 W
Input Sensitivity Mic: -32 dBu; Line: -2 dBu
Input Impedance Mic: 560 ? unbalanced, 1 k? balanced;
Line: 20 k? unbalanced, 40 k? balanced
Power Supply, Voltage (Fuses)
USA / Canada 100–120 V~,
T 8.0 A H 250 V
UK / Australia / Europe 220–240 V~,
T 4.0 A H 250 V
China 220–240 V~,
T 4.0 A H 250 V
Japan 100–120 V~,
T 8.0 A H 250 V
Power consumption@ 1/8 max power 140 W
Rigging options 6 x M10 threaded internal rigging points
Construction / Dimensions / Weight
Construction Injection-moulded polypropylene enclosure. Recessed carrying handles. 44Integral dual-angle pole mount socket. 45Powder coated galvanised perforated 46steel mesh grille with foam backing
Dimensions 719 x 457 x 368 mm
(28.3 x 18 x 14.5")
Net weight 27.7 kg (60.9 lbs
This product has not been reviewed yet.