StudioMaster Core 121 Curve Array Active PA System

The new CORE system from Studiomaster uses a specially designed curved array to provide a controlled and highly effective sound diffusion.

Combining the curved array with a powerful bass reflex subwoofer giving up to 2800W of low end power, the whole system can provide 4400W peak (1100W RMS) in a compact, portable system that will give you the reach and sonic quality expected of an ultra compact array system.

To complete the system, the CORE comes with a built-in 4 channel mixer, with DSP control and Bluetooth® connectivity.

The CORE system is designed to be simple to set-up and use. The air-suspension adjustable speaker pole includes internal wiring, so just lift and place the lightweight curve array on top of the pole. Connect your power and you are good to go! Truly an ALL-IN-ONE system. Perfect for any performance.

SUB BASS

Any modern portable PA system needs to produce clear highs and thumping bass. The CORE system is no exception. The tuned active sub bass is a bass reflex, phase inverted design incorporating up to an impressive 700W + 400W amplifier module, capable of delivering power to the sub and to the curve array system.

The wooden cabinet is made to the highest standards with durable paint finish and large easy to grip handles.

With the 12” CORE121 taking a minimal floor space of only 405mm x 470mm

In addition to the power amplifier and switch mode power supply, the sub bass also houses the control panel, angled so is easy to connect, set-up and operate mid-event.

The curve array is connected via the specially designed top-hat sockets, which are used not only to space the curve array at the right height but also pass the audio signal through the pole to the curve array without the need for any cables.

 SUB SPECIFICATION:

Speaker – 1×12” low frequency driver

Rated power (SUB) – 700W (rms)

Amplifier power – 700W (LF) + 300W (MF/HF) (rms)

Max SPL – 128dB

Dimensions – 405mm x 590mm x 470mm

Net weight – 27kg

CURVE ARRAY SPECIFICATION:

Speaker MF – 3×5” Neodymium full range driver

Speaker HF – 9×1” dome tweeter

Rated power – 300W

Coverage – 100° (h) x 70° (v)

Dimensions – 185mm x 495mm x 220mm (315mm max)

Net weight – 8kg

MIXER SPECIFICATION:

DSP – 24bit module with mode, EQ, limiter, delay and mix level control

Inputs – 2x mic (XLR) / line (6.35mm jack) balanced, 1x instrument Hi-Z (6.35mm jack), 1x stereo line (RCA phono) / Bluetooth®

Outputs – 2x balanced line / link output (XLR), 1x balanced line / link MIX output (XLR)